DISTRIBUTION MAINTENANCE BULLETIN
B22MB95007
01234567-6-x2xxxxxxxxx
November 27, 1995
USERS OF RECORD

SUBJECT: 64046E6N/J6N/D6N, 72046E5N/J5N, 72058J5N TILT STOP GAP

Dear MILNOR Customer:

In the recent past, we have learned that the gap between the tilt stops and the tilt frame may not be adequate for the machine to operate properly.

Enclosed is a set of instructions on how to adjust this gap, HDFM005501/95457N. If this gap is not maintained, the machine's balancing system could receive a false indication that the machine is balanced. If the machine is run in this "false" balanced condition, the basket can come in contact with the door and/or the door ring causing damage to the basket.

If the proper gap cannot be achieved with the hardware that is currently installed on the machine, there are kits available to help achieve this gap. The kits will be sent at no charge. Order kit no. KDFM005501 for 4046E6N/J6N/D6N machines or kit no. KDFM005502 for 72046E5N/J5N, 72058J5N machines. Model, serial number and date code of the machine must accompany requests for kits.

Since the total labor involved is about one man hour, we ask that the customer's maintenance staff perform the retrofit, if needed.

Please read the attached instructions and confirm the stop gap dimension. The instructions offer guidance on the action necessary, depending on the dimension found.

If any questions arise, please call MILNOR Technical Support at 504-464-0163.

Sincerely,

PELLERIN MILNOR CORPORATION


Daniel H. Albers
Service Engineer

DHA/das
Attachment: HDFM005501/95457N