DISTRIBUTION MAINTENANCE BULLETIN
B22MB95004
01234567-5-XXXXXXXX9XX
April 28, 1995
and M7E Users of Record


SUBJECT: LEAKING HYDRAULIC CYLINDERS


Dear MILNOR Dealer/Customer:

A kit containing the necessary tools and seals to rebuild hydraulic cylinders is now available. Should a cylinder leak, there are several ways to repair it:
1. The packing nut should be tightened with the wrench provided in the kit. There are set screws that must be loosened before the nut can be tightened.

2. If this does not correct the problem, the cylinder can be rebuilt with the new kit. The kit and detailed instructions are available under p/n 27E1647R02.

Please contact MILNOR's Technical Support by phone at 504-467-9591 or fax 469-9777 if you have any further questions.


Best regards,

PELLERIN MILNOR CORPORATION



Jennifer J. Fortier
Technical Support

JJF/ams