MSSM0913AE/92297


SUBJECT: BUSHING CHANGE FOR IMPROVED BEARING FIT

Dear MILNOR Dryer Customer:


The bushings provided with the drive shaft (or idler shaft) are to be used when re-assembling the support rollers (and pulley on the drive shaft). A bushing change was necessary due to an improved bearing fit on these shafts.

The improved fit should prohibit the bearing from "slipping" on the shaft and provide better service life.

If you have any question or comments, please notify MILNOR Tech Support at 504-464-0163.

Yours truly,

PELLERIN MILNOR CORPORATION



MILNOR Technical Support